DXsoft Products / Switcher (Version for printing)
Products | Downloads | Registration | Feedback | Awards | Links
Switcher Downloads and Registration
A simple software to handle devices connected to an LPT port.
Platform:
The 1 button erects a logical one at pin 2 of an LPT-port,
the 2 button sets high level at pin 3 and so on.
The program can be launched with several command line parameters.
The /LPTn parameter defines used LPT-port (/LPT1 , /LPT2 or /LPT3). LPT1 is used by default.
The /LPTxNNNN parameter defines LPT-port with non-standard base address (for example, LPT-port at PCI-card). There NNNN is hexadecimal base address of a port, 'x' is just letter 'x', not number.
The /M parameter enables to switch on several switches at one time.
The /Sx parameter define a switch switched on at the program start (/S1 ... /S8). /S0 means "all switches are off". To switch on several switches use several /Sx commands.
The /Ttext parameter defines a title of program window.
The /B1text ... /B8text parameters define text on button 1...8 respectively.
The /Ontop parameter puts Switcher in front of all windows.
The /EX parameter means "to set switches and close program".
There are examples of command line:
C:\Program Files\Switcher\Switcher.exe /LPT2 /Ontop
C:\Program Files\Switcher\Switcher.exe /LPT1 /M /S3 /S5 /Ontop
C:\Program Files\Switcher\Switcher.exe /LPTxE080 /S0 /EX
C:\Program Files\Switcher\Switcher.exe /LPT1 /TMy Antennas /B1dp /B2lw /Ontop
Switcher
USA 1 | USA 2
This product is freeware!
Copyright © DXsoft