[Version for printing] [Site map]
[DXsoft]
[EN]
[DE]
[RU]
[Quality Windows™ HAM radio software]
Cluster monitor. A tool for monitoring popular web-cluster service from OH9W/OH2AQ Radio Club CwType. The terminal program for CW-operators. Allow transmit both from the keyboard and from the paddle
Write new message
Total Records: 469   Records Viewed Per Page: 20     Next Page
Name Comments
469) IP logged  Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, 
TOMAS ROUSSEAUX 
TOMASROUSSEAUX22@AOL.COM
Location:
-
Thursday, 13. January 2022 14:54 Host: c-73-210-133-219.hsd1.il.comcast.net Write a comment Send E-mail

HOW TO RETRIEVE BITCOIN LOST TO online theft,  Anyone out there seeking to recover any form of  crypto coins and financial assets  from online sc ams or wallet hackers ,also BTC sent to wrong addresses , i recommend this very dependable agency  (QUADHACKED@GMAIL.COM) . This recovery spe#@*%!t was fantastic in helping me recover my  BTC, lost  to these evil con-artists after I provided all relative information and necessary requirements to this recovery spe#@*%!t . Of my 1.9BTC  stolen from my wallet  a total of   1.6138 BTC  was finally recovered . I was glad I was able to recover this much after losing even  more to the fakes I initially contacted before I Was in contact with  this excellent spe#@*%!t . Do not hesitate to contact QUADHACKED@GMAIL.COM if you are in such a situation seeking recovery from any form of online cryptocurrency scam , and follow their instructions so they could help you . 
468) IP logged  Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, 
Rick Ellison - N2AMG 
rellison@twcny.rr.com
Location:
-
Monday, 20. December 2021 02:48 Host: cpe-24-59-115-98.twcny.res.rr.com Write a comment Send E-mail

Hi. I am writing a program that I want to send text to the TX Buffer of CWType. and then have CWType send it.I am using the following:
For x = 1 To Len(txtToSend.Text)
ret = DxsoftPutSymToTxBuffer(Mid(txtToSend.Text, x, 1))
Next
The right number of characters show up in CWType but they are just random symbols to show the text. TEST comes out like "<<<<" Any idea why it is doing this. It looks like the call only excepts one character at a time so that is the reason to use the for next. RET does =1

Sergei Podstrigailo:
You are sure that you send one-byte symbols, NOT Unicode-16 ?

Rick Ellison:
By looking at the definition of the call I assumed it accepted just a normal text string character. So I am just sending a single character as a string type.

Rick Ellison:
I was able to get this working after switching to a one byte chr. I do have another question I can include } in my string to stop TX. Is there a single character to place in TX instead of sending a message 111

Sergei Podstrigailo:
No, you need to send broadcast message or place ~[tx] macro.
467) IP logged  Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, 
Rick Ellison - N2AMG 
rellison@twcny.rr.com
Location:
-
Monday, 20. December 2021 02:48 Host: cpe-24-59-115-98.twcny.res.rr.com Write a comment Send E-mail

Hi. I am writing a program that I want to send text to the TX Buffer of CWType. and then have CWType send it.I am using the following:
For x = 1 To Len(txtToSend.Text)
ret = DxsoftPutSymToTxBuffer(Mid(txtToSend.Text, x, 1))
Next
The right number of characters show up in CWType but they are just random symbols to show the text. TEST comes out like "<<<<" Any idea why it is doing this. It looks like the call only excepts one character at a time so that is the reason to use the for next. RET does =1

Sergei Podstrigailo:
You are sure that you send one-byte symbols, NOT Unicode-16 ?

Rick Ellison:
By looking at the definition of the call I assumed it accepted just a normal text string character. So I am just sending a single character as a string type.

Rick Ellison:
I was able to get this working after switching to a one byte chr. I do have another question I can include } in my string to stop TX. Is there a single character to place in TX instead of sending a message 111

Sergei Podstrigailo:
No, you need to send broadcast message or place ~[tx] macro.
466) IP logged  Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, 
Rick Ellison - N2AMG 
rellison@twcny.rr.com
Location:
-
Monday, 20. December 2021 02:48 Host: cpe-24-59-115-98.twcny.res.rr.com Write a comment Send E-mail

Hi. I am writing a program that I want to send text to the TX Buffer of CWType. and then have CWType send it.I am using the following:
For x = 1 To Len(txtToSend.Text)
ret = DxsoftPutSymToTxBuffer(Mid(txtToSend.Text, x, 1))
Next
The right number of characters show up in CWType but they are just random symbols to show the text. TEST comes out like "<<<<" Any idea why it is doing this. It looks like the call only excepts one character at a time so that is the reason to use the for next. RET does =1

Sergei Podstrigailo:
You are sure that you send one-byte symbols, NOT Unicode-16 ?

Rick Ellison:
By looking at the definition of the call I assumed it accepted just a normal text string character. So I am just sending a single character as a string type.

Rick Ellison:
I was able to get this working after switching to a one byte chr. I do have another question I can include } in my string to stop TX. Is there a single character to place in TX instead of sending a message 111

Sergei Podstrigailo:
No, you need to send broadcast message or place ~[tx] macro.
465) IP logged  Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, 
Rick Ellison - N2AMG 
rellison@twcny.rr.com
Location:
-
Monday, 20. December 2021 02:48 Host: cpe-24-59-115-98.twcny.res.rr.com Write a comment Send E-mail

Hi. I am writing a program that I want to send text to the TX Buffer of CWType. and then have CWType send it.I am using the following:
For x = 1 To Len(txtToSend.Text)
ret = DxsoftPutSymToTxBuffer(Mid(txtToSend.Text, x, 1))
Next
The right number of characters show up in CWType but they are just random symbols to show the text. TEST comes out like "<<<<" Any idea why it is doing this. It looks like the call only excepts one character at a time so that is the reason to use the for next. RET does =1

Sergei Podstrigailo:
You are sure that you send one-byte symbols, NOT Unicode-16 ?

Rick Ellison:
By looking at the definition of the call I assumed it accepted just a normal text string character. So I am just sending a single character as a string type.

Rick Ellison:
I was able to get this working after switching to a one byte chr. I do have another question I can include } in my string to stop TX. Is there a single character to place in TX instead of sending a message 111

Sergei Podstrigailo:
No, you need to send broadcast message or place ~[tx] macro.
464) IP logged  Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:91.0) Gecko/20100101 Fi 
JoAnn Donaldson 
joannplano2005@yahoo.com
Location:
-
Tuesday, 14. September 2021 21:13 Host: cpe-76-183-170-35.tx.res.rr.com Write a comment Send E-mail

When I first startup CEType, it will not respond to my Keyboard. If I active a macro it will then send from the keyboard.

JoAnn
AB8YZ

Sergei Podstrigailo:
I am afraid that I didn't quite understand your problem.
If you want to start transmission automatically, read Help-file about "Mox and Paddle" settings.
More over, I strongly recommend to read Help-file completely.
463) IP logged  Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, 
Manlio Laschena 
manlio.laschena@gmail.com
Location:
-
Sunday, 12. September 2021 12:21 Host: adsl-90-110.38-151.wind.it Write a comment Send E-mail

I have been for long time user of MScan Meteo to get FAX and RTTY.
I use an SSB receiver and a PTC IIex from SCS, via Com1
Now I have been oblidged to change my win 7 32b to a win 10 64b and I have some troubles using MScan Meteo.
I would like to use SeaTTY but I don't know the program and I would like to know if I can use it with the PTC IIex output signal.Thanks

Sergei Podstrigailo:
SeaTTY is the best RTTY and HF-FAX decoder in the world :) It should work with any SSB receiver.
SeaTTY has 30-day trial period. Just download and try it.
462) IP logged  Mozilla/5.0 (Windows NT 10.0; rv:91.0) Gecko/20100101 Firefox/91.0 
Jay N4NRL 
n4nrlradio@gmail.com
Location:
-
Monday, 30. August 2021 18:42 Host: c-76-122-102-251.hsd1.ga.comcast.net Write a comment Send E-mail

Greetings...I need to purchase CWTYPE but wonder if the purchase allows me more than one computer? If I missed this already answered my apologies. I would like to use CWTYPE with my station desktop but also use it with my laptops when working field-day or JOTA with scouts. In fact, I have two different laptops that I take out for my stations and would like the advantage of not having to identify just one laptop for temporary uses.

Sergei Podstrigailo:
CwType is free. Maybe do you mean Cw_Get?

Short answer is Yes, you can.

Long answer is

Registered copy may either be used by a single user who uses Cw_Get personally on one or more computers, or installed on a single computer used by multiple people, but not both.
461) IP logged  Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, 
Nathan Stevens 
nat250s@yahoo.com
Location:
-
Monday, 30. August 2021 13:23 Host: pool-108-35-110-90.nwrknj.fios.verizon.net Write a comment Send E-mail

Hi,

I am trying to use TrueTTY on Windows 10 to send ascii 8 data at a 1200 baud, but the program doesn't seem to be working correctly. The UI freezes allot and there are pauses in the audio signal being sent to speakers. Sending text seems to work correctly at lower baud rates 200, 100 though. Not sure what the issue is? This almost looks like there is an issue gaining access to the sound card at higher baud rates. Test on two different win10 computers and same issue.

Sergei Podstrigailo:
There can be problem at 1200 bps during _receiving_ , if SQL button is off.
Try do deselect "Use duplex sound card" option to stop receiving during transmission.

Another most often reason of "strange problems" is bad soundcard driver. So it fixes by changind driver to more appropriate.
460) IP logged  Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:78.0) Gecko/20100101 Fi 
Vtradguy 
Vtradguy@hotmail.com
Location:
-
Wednesday, 4. August 2021 18:23 IP: 131.137.245.206 Write a comment Send E-mail

is there a Canadian sales point of contact for DxSoft Products.

Sergei Podstrigailo:
We sell online and worldwide from this website.
459) IP logged  Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, 
satyan vu3mes 
satyansarath@gmail.com
Location:
-
Monday, 14. June 2021 08:08 IP: 27.5.168.168 Write a comment Send E-mail

Hi Sergi
just downloaded and installed cw type, it worked for 2 overs and lost connection with the icom ic7300. Is it imperative that i register the program, i went to the registration link. it is not working.
or is there any technical issue here

thanks 73

satyan vu3mes

Sergei Podstrigailo:
CwType is free.
What is your problem exactly?
458) IP logged  Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:88.0) Gecko/20100101 Fi 
Jacek 
sp8bai@gmail.com
Location:
-
Tuesday, 4. May 2021 20:40 Host: user-5-173-140-194.play-internet.pl Write a comment Send E-mail

Hi,
How can I check this log without buying it. After installing it says it is 45 days to check, but a box appears to enter registration. Registration is only after purchase.
Regards

Alex:
Hello
Looks like you already run it on this computer before.
I'll send you program to clear trial period
457) IP logged  Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, 
Gil 
w0mn00@gmail.com
Location:
-
Tuesday, 2. February 2021 22:15 IP: 071-090-099-108.res.spectrum.com Write a comment Send E-mail

Cw_get registration. Can it be installed on ore than one computer? DO I need to get a new code every time I installs , especially after new Windows versions or installing new hard drive etc or will the code work om anything at any time. ?

Sergei Podstrigailo:
Registered copy may either be used by a single user who uses Cw_Get_ personally on one or more computers, or installed on a single computer used by multiple people, but not both.

You don't need new code to install Cw_Get_ on a new computer, so please make backup copy of your code _outside_ your computer.
456) IP logged  Mozilla/5.0 (Windows NT 6.1; Win64; x64) AppleWebKit/537.36 (KHTML,  
Catherine Hammond 
vk7gh@wia.org.au
Location:
-
Friday, 11. December 2020 03:55 IP: 81.188.213.112.sta.wbroadband.net.au Write a comment Send E-mail

I am trying to download CW Type. Neither USA 1 or USA 2 will download. Is it still available?

Sergei Podstrigailo:
I just checked them, both URL's are available.
455) IP logged  Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, 
Vijay Srinivas 
vijays@comcast.net
Location:
-
Thursday, 19. November 2020 19:19 Host: pool-141-156-133-25.washdc.fios.verizon.net Write a comment Send E-mail

Hello,
I have a registered version of Cw_Get software on my old laptop. How do I register the product on my new laptop?

Account opened on 4/1/2020
Order #" 117671139
Name: Vijay Srinivas
Callsign: AB3VZ

Thanks for your response

Sergei Podstrigailo:
Download and install newest version onto new computer and copy/paste reg-code from old e-mail.
Do you have copy of this e-mail, isn't it?
454) IP logged  Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, 
Sergey 
ihappym85@gmail.com
Location:
-
Wednesday, 30. September 2020 08:08 IP: 183.mtsnet.ru Write a comment Send E-mail

Incorrect operation of CWType & WIKeyer2.
The program spontaneously changes the baud rate. After setting the speed manually, either on WIKeyer2 or in the program, everything is normalized, but until the next start.

Sergei Podstrigailo:
What do you mean when write "changes"? Does WinKey start with random speed?

Sergey:
No WINKeyer starts at the set speed and the CWType has a set speed. For example "115". But after a while the speed changes spontaneously, but the speed window on the CWType remains the same 115. After changing the speed manually (it does not matter on a WINKeyer or on a CWType) everything becomes normal. But the next time you turn it on and off, everything repeats. This effect is not when working with N1MM logger and other test logs

Sergei Podstrigailo:
I can't imagine how to reproduce it.
It looks like a bug in WinKey firmware.
I have found at least one bug in the firmware near speed report...
453) IP logged  Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, 
Sergey 
ihappym85@gmail.com
Location:
-
Wednesday, 30. September 2020 08:08 IP: 183.mtsnet.ru Write a comment Send E-mail

Incorrect operation of CWType & WIKeyer2.
The program spontaneously changes the baud rate. After setting the speed manually, either on WIKeyer2 or in the program, everything is normalized, but until the next start.

Sergei Podstrigailo:
What do you mean when write "changes"? Does WinKey start with random speed?

Sergey:
No WINKeyer starts at the set speed and the CWType has a set speed. For example "115". But after a while the speed changes spontaneously, but the speed window on the CWType remains the same 115. After changing the speed manually (it does not matter on a WINKeyer or on a CWType) everything becomes normal. But the next time you turn it on and off, everything repeats. This effect is not when working with N1MM logger and other test logs

Sergei Podstrigailo:
I can't imagine how to reproduce it.
It looks like a bug in WinKey firmware.
I have found at least one bug in the firmware near speed report...
452) IP logged  Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, 
Sergey 
ihappym85@gmail.com
Location:
-
Wednesday, 30. September 2020 08:08 IP: 183.mtsnet.ru Write a comment Send E-mail

Incorrect operation of CWType & WIKeyer2.
The program spontaneously changes the baud rate. After setting the speed manually, either on WIKeyer2 or in the program, everything is normalized, but until the next start.

Sergei Podstrigailo:
What do you mean when write "changes"? Does WinKey start with random speed?

Sergey:
No WINKeyer starts at the set speed and the CWType has a set speed. For example "115". But after a while the speed changes spontaneously, but the speed window on the CWType remains the same 115. After changing the speed manually (it does not matter on a WINKeyer or on a CWType) everything becomes normal. But the next time you turn it on and off, everything repeats. This effect is not when working with N1MM logger and other test logs

Sergei Podstrigailo:
I can't imagine how to reproduce it.
It looks like a bug in WinKey firmware.
I have found at least one bug in the firmware near speed report...
451) IP logged  Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:68.0) Gecko/20100101 Fi 
Sergei Podstrigailo 
samx@hamport.com
Location:
-
Wednesday, 23. September 2020 23:04 Host: l49-234-14.novotelecom.ru Write a comment Send E-mail

Test of fixed book

Sergei Podstrigailo:
Test of comment
450) IP logged  Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, l 
Roger 
rogerleivseth@icloud.com
Location:
-
Friday, 27. March 2020 11:35 Host: telia-590825-225.connect.netcom.no Write a comment Send E-mail

Hi,
I cant registrer cause it wont accept my e mail adress. I have lost my password for the SeaTTY for LB1KH can you help me?

Sergei Podstrigailo:
Write me from your new e-mail address or contact me wia webform

http://www2.dxsoft.com/sticket/
Write new message
HTML code is disabled     Next Page
Powered by Advanced Guestbook 2.3.1